Temperature  Measurement  and Control Instrumentation

| Home| Our Products | Thermocouple Assemblies | Instrumentation & Signal Cables  | 

| Thermowell| Instrumentation for Temperature Measurement & Control |

| Resistance Temperature Detectors  | Specialty Products & Accessories |Contact Us |

 

PROBES FOR HANDHELD INSTRUMENTS - THERMOCOUPLE & RTD's.

For any application the probe makes the measurement. Therefore, it is most important to choose the right probe. The following pages provide a wide selection of probes with handle, extension cord and male plug....... a probe for every job.

Some of the salient features of Fabrika's Thermoprobes  :-

The accuracy of a temperature measurement depends principally upon the probe design as it is the crucial link relating to the object whose temperature is being measured. Each of FABRIKA's Thermoprobes has been scientifically engineered to do a specific job.

We offer the widest selection of Probe designs. Proper selection of the probe for each use ensures meaningful measurements. General purpose, penetration, surface and Air / Gas standard probes are available from ready stock - often Off the shelf. Special purpose probes for specific applications are also available on reasonable delivery schedules.

Colour coding of all probes in accordance to ANSI Standards permits easy identification. All the probe cables as well as handles are ANSI colour coded -Type ‘J’ - Black and Type ‘K’ are Yellow & PT100 are Grey.

All probes are fitted with durable molded ABS Plastic handles. A strain relief spring on the handle, protects the cable against damage due to repeated Flexing and tugging.

All Thermoprobe are calibrated and interchangeable with the  meter to assure accuracy in the plant for every type of measurement.

The user can have confidence in the system because all probes are individually calibration checked at two temperature points with the meter purchased. 

Probes terminate in a standard miniature male thermocouple connector for direct connection with the standard miniature female connector mounted on the meter.

Select from our range of Probes designed for use with Handheld Instruments . All Probe Assemblies confirm to the following specifications :-

Element Calibration

:

Type K , Type J , PT100 As per your requirements

Junction Type

:

Grounded / Ungrounded/Exposed

Sheath Material

:

AISI 316 Stainless Steel / Inconel 600.

Sheath OD "D"

:

1 mm / 1.6 mm / 3.2 mm/6.35mm ( Other sizes available on Specific Request)

Insertion Length "L"

:

6", 12 ",18",24"

Accuracy Limits

:

Better than permissible limits of error as per ANSI MC 96.1.

Insulation Material

:

Highly compacted MgO powder for vibration stability & quick response.

Termination Type

:

Flexible Extension leads individually sheathed with overall color coded PVC jacketing connected to the Thermocouple element through transition splice and flexing spring. Extension leads terminate in molded miniature male quick connect / disconnect plug.

Length of Extension Leads

:

1500 mm.

FAST RESPONSE IMMERSION PROBE

HEAVY DUTY SPRING LOADED SURFACE PROBE
THERMOCOUPLE  T-HANDLE PENETRATION PROBE

THERMOCOUPLE BOLT ON SURFACE PROBES ( WASHER TYPE )

 PENETRATION PROBE

STANDARD IMMERSION PROBE

THERMOCOUPLE  MINIATURE ELECTRONIC PROBE

ALLIGATOR CLIP PROBE


 MAGNETIC SURFACE PROBES

AIR / GAS PROBE

 
 

Copyright 2000 www.ishainfo.com Web Hosting & Development. All rights reserved.
Site Best Viewed in Internet Explorer 800x600 resolution